Minimal ändring i formulering

rapport/methods.tex

@@ -1,6 +1,6 @@
 % !TeX root = main.tex
 \chapter{Methods}\label{cha:methods}
-This chapter covers the methodologies used during the project. To man dude! \todo[ta bort detta]
+This chapter covers the methodologies used during the project.
 
 \section{Prestudy}
 During the project efforts were made to find relevant research using Linköping University Library's\footnote{\url{https://liu.se/en/library}} and Google Scholar's\footnote{\url{https://scholar.google.se/}} search engines. Among the keywords used in searching were;
@@ -34,8 +34,8 @@ In either case, the following tasks should be considered if there is time:
     \item Evaluate these methods.
 \end{enumerate}
 
-\section{Initial measurement of the old equipment}
-To decide the forthcoming of the project, the equipment first had to be checked for it's performance and if it is within the limits for use with the newer standard. Because there is no dummy loads available at this point of the project, only open load measurements could be done.
+\section{Examination and initial measurement of the old equipment}
+To decide the forthcoming of the project, the equipment first had to be checked to see if it's performance were within the limits for use with the newer standard. Because there is no dummy loads available at this point of the project, only open load measurements could be done.
 
 With exception for Pulse 3a and Pulse 3b, all of these pulses were measured with the use of the high voltage differential probe described in \autoref{sec:hv-diff-probe}. The pulses are measured both directly on each generator connected according to \autoref{fig:manual-measurement-hv-diff} and also through the coupling network CNA~200, as depicted in \autoref{fig:manual-measurement-hv-diff-cna}. 
 \todo[figure of connection]